VFC Series Fiber Cut Simulation optical switch

The VFC2011-SM is a single-mode 20 port fiber-cut switch based on VOAs (variable optical attenuators). It allows configuring the switching delay and the attenuation to simulate real-world fiber-cut scenarios. The VFC2011-SM switch can also be used as a multi-channel programmable VOAs to balance optical power in DWDM applications.

VFC2011-SM Specifications
Wavelength 1280-1625 nm
Insertion Loss (excluding connectors) ≤ 1.0 dB
Wavelength Dependent Loss (WDL) ≤ 0.15 dB
Polarization Dependent Loss (PDL) ≤ 0.1 dB
Return Loss > 55 dB
Attenuation Dynamic Range > 30 dB
Attenuation Resolution 256 steps
Switching Time ≤ 5ms
Max Repetition Rate 20 Hz
Operating Temperature range -5 ~ 70 °C
Relative Humidity Range 5 ~ 85 % RH
Durability > 10 Million Cycles
Form Factor 1U rackmountable, 5 inch deep
Power Supply 100-240V AC, 50/60Hz
Power Consumption < 7 Watts
Display 1 inch OLED
Optical Interface 20x Duplex Single-mode SC/LC connectors
Network Interface 1x 10/100 Mbps RJ45 Ethernet
Peripheral Interface 1x USB for WiFi Dongle or external Flash
Console/Debug Interface 1x USB micro connector (Baud 115200)
Software Interfaces
CLI, SSH, Web (HTTPS), REST API, SNMP, Syslog      


Click here for VFC series fiber-cut switch documentation
Contact Us